Sensitive glue on the semi-automatic screen printe
Source:本站 Date:2015/11/24
1. Check whether the sensitive glue is enough, general tank a quarter is enough, enough to make photosensitive glue.
2. Pour the sensitive glue into semi-automatic screen printing machine sizing apparatus to two-thirds full, balanced on both sides of the intermediate point of my right hand sizing; On the left hand hold web space frame under the box on the ground, clean screen into a 45 degree Angle with the ground, from the bottom up glue; Sizing machine and screen Angle of 45 degrees; Only from the bottom up, not painted parts of sizing again, until a full face are sensitive glue and very evenly.
3. After the network version of the sensitive glue, net cloth flat into semi-automatic screen printing machine on top. After about 10 minutes, net cloth can't see the water droplets; No water droplets on the net frame around the network version has been dry. The second time sensitive glue on the can. Again drying, ?